Author Topic: Dinning Table CL21RBS Fix  (Read 421 times)

usamarlin

  • Newbie
  • *
  • Posts: 10
    • View Profile
Dinning Table CL21RBS Fix
« on: March 16, 2019, 05:20:18 PM »
Got the wobble out of the dinning table. First, take the pole off, and on the bottom of the pole drill the 3 rivets out.
pull the black threaded piece off the pole. its got some cheap glue holding it on along with the rivets. I had to use
a rod inside the pole to push it out. Then clean all the old glue off the black piece and the pole. Get some GOOD epoxy
I use {Marine Tex}. Put it on thick both inside and outside of pole, push the piece on and let it dry, no need for the rivets
any more the epoxy took 100% of the PLAY out. Now on top of the pole I took some super thin leather and cement glued it around the outside of the black insert that pushes up in the table. You can use anything, leather is just what i had on hand and it worked great, Both of these step took all the play out. The Table has no wobble at all. Super satisfied it is now how it should be. Took about 2 hours

Lensibne

  • Newbie
  • *
  • Posts: 2
    • View Profile
Re: Dinning Table CL21RBS Fix
« Reply #1 on: May 13, 2019, 12:15:39 AM »
I am very interested in this matter. But still did not get into something

usamarlin

  • Newbie
  • *
  • Posts: 10
    • View Profile
Re: Dinning Table CL21RBS Fix
« Reply #2 on: June 21, 2019, 08:57:38 PM »
What can i explain.