Author Topic: Sewer Hose Carrier to short fix  (Read 862 times)

Hunter72

  • Newbie
  • *
  • Posts: 1
    • View Profile
Sewer Hose Carrier to short fix
« on: December 24, 2018, 12:12:19 PM »
Bought a Camco Rhino FLEX Heavy Duty RV Sewer Hose and my sewer hose carrier was to short.  Was getting ready to buy a longer carrier but found that a leaf blower vacuum pipe fit the end of my existing carrier.  Cut, inserted and glued a piece of plexiglas over the end and saved myself some $.  Not sure what leaf blower vacuum pipe but if you have an old one lying around, you might give it a try. Hope this helps....

colors of the wind

  • Newbie
  • *
  • Posts: 6
    • View Profile
Re: Sewer Hose Carrier to short fix
« Reply #1 on: April 12, 2019, 05:53:24 AM »
Thanks for sharing!
I replaced my OEM sewer hose with a "Camco 39631 RV HTS 20' Heavy-Duty Sewer Hose" and a "Camco 39543 Twist Connect Kit Sewer Fitting", both from Amazon. (Am I allowed to say that?) All 20 feet of the new hose fit into the tube without any problem, and it extends at least twice as far as the original.

To prevent the clamps from digging into the hose, I wrapped the hose with several layers of duct tape before putting the clamps on. Works like a champ!