Messages

Definitely poor design. Any outside lights should be in the main cabin.

And why would you install a switch and run no wires to it? Prefabbed?

I have a 21RBS and I have the same switch. At the dealer when I picked up the trailer I had the same question as I could not figure out what the switch did. It turns out it controls an amber light under the door that illuminates the steps of the trailer.

Thanks for the responses. I plan on contacting the dealer and see if it is still covered under warranty. I know why it happened. I had some beverages stored under the dinette (maybe about 40 or 50 pounds). the left corner of the facade dug into the floor as the slide came in. There is not much of a gap under the facade and there is some rock to the slide. I would make sure your slide has little to no weight in it when you move it.

2018 composite floor with a vinyl looking overlay. The vinyl ripped.

Just got back from a week camping in my CL21rbs. When pulling in the dinette the facade dug into the floor and ripped it. Anyone repair a rip? Thoughts?

Tried it. Didn't work. Must be the antenna. I even changed the cable to the TV.

I have had the same problem with my 2018 21RBS. When I first got the trailer I was able to scan and find channels no problem. Now I scan and find nothing. I have check all the internal connections and everything looks good.

Are you removing the connector plate in the ceiling inside? Os that were the faulty connection was or is it on the roof at the antenna?

Just took delivery of my trailer today! Woot Woot! The first thing I noticed is the table is a wobbly POS. I had been looking at a marine post to do a swap out if they had not resolved the problem and it look like I will go that direction. I wanted to see the size and hole pattern before I order anything. The base seems to be the problem. The connection is secure but the removable post is too shallow. Once I remove it I can see what it will take.

Thanks! I have a 2018 RBS on order and started looking at marine posts to help if it is an issue.

Can you see what flops around? Is it the hardware (post and connection) or the connection to the floor. Is the floor stable enough to support the movement of the table?

Pictures please?

I am considering a 21RBS and cannot see what the XL package adds. It looks like all the items are standard. Has anyone bought it and what is the value? Thanks! Any other options/upgrades a must have?