Livin' Lite Forum

QuickSilver => Upgrades and Modifications => Topic started by: grecamp on September 03, 2019, 08:11:54 PM

Title: electric wire diagram, trailer lights help
Post by: grecamp on September 03, 2019, 08:11:54 PM
Well, long story short, I decided to remove the original main wire from my QS 8 and replace it with a high quality wire with a junction box.

However, I quickly realized that the original wire is a total mess of wire splices, under the cover of electric tape. Trying to recreate this is hard.

If electric diagram does not exist, can anyone point me to a diagram that shows what lights come on (solid or flash) under what conditions?

We have two pairs of front corner lights, both orange (front, side)
Two pairs of rear corner lights (side is red, back is orange)
Lastly we have three sets of bumper lights, sides and center, all red.

Title: Re: electric wire diagram, trailer lights help
Post by: grecamp on September 05, 2019, 07:19:55 AM
no worries, I sorted it out quickly with trials and errors