On my 2013 13 QBB the AC unit is mounted in a cabinet along the side wall. Is there any schematic that shows how that's fastened in place? I removed the front trim and the unit is definitely not just sitting in the cabinet but I can't enough to figure out what needs to be disassembled to remove the unit. Thanks.
Mitch
Mitch,
The side mounted A/C were installed from the outside. You will need to pull the exterior grill and you should be able to figure it out from there.
-Dan
Thanks Dan. Appreciate the help.
Hey Dan, one more thing, would you know the model number of the Frigidaire AC used on the 2013 13 QBB line. I'm going to replace the cord assembly on it before I think about removing the whole unit. Thanks
Mitch
Mitch,
The model number should be marked somewhere on the A/C. We only used Frigidaire A/C's for a short time. Most were Danby 8,000 BTU AC's
I believe most of the cords are pretty much standard however and you should be able to pick them up at about any appliance store.
They used a 20 amp 110v appliance cord.
-Dan
Thanks