Messages

Thank you for the replies. I just got back from Wisconsin Dells with the family for the first trip and just use shore  power. Everything worked great on the shore power. I just have a few things to modify or change to make it a little better for me.  But before I head to Texas to find a house to live in I have to fix the power for the battery, and fix the potable water location with that blind Spicket.  I will let you know when I find it will take me a few days.
Thank you very much Mr Smith

 How do you get the 12 V to stay on after you disconnect shore power or disconnect from the running vehicle.  Is there a transfer switch or something to use 12 V power. Because after I disconnect from my van or I disconnect from the shore power my batteries will not kick in everything goes dead any help. thank you Mr Smith
Ps  I have 12.37 V to the  Gray circuit breaker on the bottom of the frame.
2017 cl 21 rbs

 I purchased my mattress from Walmart.  I have a 2017 21 RBS.  Mr Smith

 New style light fixtures LED's with non-replaceable bulbs, very difficult Lens covers to get off without  marring up the plastic . Mr Smith

 Thank you very much for this information I will put it to very good use. The only thing is that is one expensive fitting . Do you have the model number of the fitting you've purchased.  And can I get a picture of the finished product that would be super. Thank you very much Mr Smith

Does your 2018 trailer have a  aluminum floors or the 2 inch thick foam and fiberglass floors. My 2017 21RBS has the 2"  foam and fiberglass.  Just curious. Thank you Mr Smith

 Did you ever get your freshwater tank fixed. Did you put  a new Lowpoint drain, and cap off the old one. Because I have the same issue. Would really like to know if you did anything or if will be livinlite help in anyway.  I have a 2017 CL 21 RBS.   Thank you Mr Smith.

 I was under my trailer the other day and took this picture of the axle. Mr Smith
PS I feel much better now. Still curious about the sideplate reading 2500 pounds per axle.

You need a very thin  screwdriver and place the tip at the very point of the lens cap in the body of the housing, and pride down the lens cover. Mr Smith

 I figured out how to get the lenses off and there are four screws that hold the lite to the ceiling. As suspected bad  connector. 

 Here's a picture of mine it is a denticle to the one I showed you earlier mine is a 2017 possibly 2017.5 I do not know when the model year ends. I just need to know so I can load my trailer properly and not put my family or ANYONE ELSE IN DANGER ON THE ROAD.  Thank you Mr Smith
I'm not yelling I'm not upset I'm not being angry or anything like that I just want everybody to be safe.

 How do you remove the ceiling light in a 21RBS I would like to tighten the loose connection any help would be much appreciated thank you. Mr Smith

Ok so this means the 21,s have 5000# GVWR. THE 468# tung weight does not apply. This means The old cargo carrying capacity was 1452.  Now minus the tongue weight 468 pounds leaves you with 984 pounds. So the actual cargo carrying capacity is 984 pounds not 1452 pounds. Is this correct. I just want the real numbers so I do not overload my trailer. Thank you Mr Smith

 Thank you for your reply. This does make sense but it still makes me very nervous. I guess  only time will tell. Thank you again for the reply. Mr Smith

 Look at this picture and see if you can tell what's wrong.  I have down payment on a 2017 CL21 RBS.  Can somebody please shed some light on this.  These new leaf spring axles are only 2500 pounds weight rating each. They are saying the gross vehicle weight 5468. The old torsion axels are rated for 3000 pounds each.  Is there something I'm not understanding here some help would be appreciated thank you.