Messages

I was able to get it out. The plastic top was held down by some wonderfully sticky tape. It took persistent pressure but a few sections gave in eventually. Once that is off you can easily remove it.

The screws take a #2 square drive.

Whoever put in the weather stripping around the AC was sloppy, most of it was wadded up and the adhesive backing hadn't been removed.

I had some time to investigate more. The AC unit is held down from the top by a pair of angle brackets. They are screwed into the AC unit and the aluminium frame inside the trailer.  The plastic cover on the top of the AC frame must be removed to get to them. I think it is glued down. I tried to pry it off but it is really stuck down. I don't want to crack it.

I may try some gentle heat on the aluminium to soften the adhesive...

I have a 2015 QS10 and I want to remove the AC unit and replace it with a panel.
1) What exactly do I need to remove to get it out?
2) Does Livinlite sell a panel I can put in its place?

We rarely need AC so I want to store it and save a little weight and clutter.