Author Topic: What is the sealer between the jack brackets and camper side?  (Read 3444 times)

Brian Churchwell

  • Newbie
  • *
  • Posts: 5
    • View Profile
What is the sealer between the jack brackets and camper side?
« on: October 01, 2017, 03:36:53 PM »
I contacted Rieco Titan to ask about remounting the corner jack brackets so that the jacks protrude to the front and rear rather than the sides.  This will make the rig noticeably narrower and improve visibility with the side mirrors.  Rieco Titan said this is the way they used to be mounted until truck fenders got wider so now they are typically mounted to the side.  There is no other reason that they have to be mounted one way or the other, and it's fine to change them as long as the truck allows.

Could someone from Livin' Lite post the sealer that's between the brackets and camper so that I can have some on hand if I decide to do this?  Mine is a 2016 Ford 8.6 with black sealer.

Any other comments on why this is or isn't a good idea?
2016 Ford 8.6 TC

djmiller

  • Guest
Re: What is the sealer between the jack brackets and camper side?
« Reply #1 on: October 02, 2017, 06:54:29 AM »
They construction on the sidewall uses 1.5x3 x .125 tube and are fastened through the tube utilizing insert nuts.
THEY CANNOT BE MOVED!
There would be no way to reattach them.

-Dan

Brian Churchwell

  • Newbie
  • *
  • Posts: 5
    • View Profile
Re: What is the sealer between the jack brackets and camper side?
« Reply #2 on: October 30, 2017, 02:07:46 AM »
On my TC the insert nuts can be accessed, but on further review rearranging the brackets isn't possible because the bolt pattern won't line up when they are reversed.

Rieco Titan can't supply undrilled brackets, so I would have to drill a set that would end up looking like swiss cheese to remount them.

Dan, can you say what the sealer is anyway for future reference?
2016 Ford 8.6 TC

Seattle-TC11

  • Newbie
  • *
  • Posts: 11
    • View Profile
Re: What is the sealer between the jack brackets and camper side?
« Reply #3 on: July 25, 2019, 06:57:58 PM »
The sealant on my TC11 is black butyl. Most hardware stores sell it in the roofing supply. It is typically sold in 2 wide rolls. It can be formed into any shape and pieces are easy to stick together to made any width.

It cleans very easily with Goo Gone cleaner. That product will should harm your paint. It is designed to remove stuff like this.