Replacing 10’ awning with an 8’ awning on 2014 DBS

Started by JimmyChris, October 11, 2023, 09:05:32 PM

Previous topic - Next topic

JimmyChris

My awning on our 2014 DBS is about ready to be replaced. The fabric is rotting, the left support was clipped by a big rig and slightly bent a couple of years ago, and the pull strap just tore off. I would like to replace the 10' awning with an 8' awning to allow the window on the right side to open without the awning being open. Has anyone done this? I took a quick measurement and if the left support arm is in the same location, the right arm support bracket would be located about 4" into the front wheel well. Looks like I would have to shift the whole awning to the right about 4-5". I would appreciate any suggestions or comments from someone who has successfully done this.
Thanks!

finnski

Yes. I provided pictures a while ago. Search this thread.
2014 CL14DB

ulnaoperating

Yes, I agree. Since quite some time ago, I have been sending pictures to you. Look for this thread and try to find it.