Loose connection in the ceiling light

Started by Mr Smith, June 11, 2017, 03:28:22 AM

Previous topic - Next topic

Mr Smith

 How do you remove the ceiling light in a 21RBS I would like to tighten the loose connection any help would be much appreciated thank you. Mr Smith
2017 CL 21RBS  aluminum cabinets, dinette
2000 Ford E-150 4.6L  conversion van

Mr Smith

 I figured out how to get the lenses off and there are four screws that hold the lite to the ceiling. As suspected bad  connector.  >:(
2017 CL 21RBS  aluminum cabinets, dinette
2000 Ford E-150 4.6L  conversion van

DocktorJJ

So how do you get lens off?  Did not see any screws holding lens and do not want to break a fixture - more detail please?
2017 Camplite 21RBS
2015 Toyota Tundra
Central Florida

Mr Smith

You need a very thin  screwdriver and place the tip at the very point of the lens cap in the body of the housing, and pride down the lens cover. Mr Smith
2017 CL 21RBS  aluminum cabinets, dinette
2000 Ford E-150 4.6L  conversion van

djsamuel

Quote from: DocktorJJ on June 17, 2017, 09:24:18 PM
So how do you get lens off?  Did not see any screws holding lens and do not want to break a fixture - more detail please?

On my 2013 21BHS, you squeeze the cover and slide it to the outside (away from the center).
2013 Camplite 21BHS

Mr Smith

 New style light fixtures LED's with non-replaceable bulbs, very difficult Lens covers to get off without  marring up the plastic . Mr Smith
2017 CL 21RBS  aluminum cabinets, dinette
2000 Ford E-150 4.6L  conversion van