Started by Silverfox, May 02, 2017, 07:22:09 PM
Quote from: Mr Smith on August 31, 2017, 04:25:35 PM This is why I like the new axle set up. A simple bottle jack and jackstand is all you need to change the tire, no special jacking sequences needed, like with torsion bar suspension. Just put the bottle jack underneath the U-bolt plate and off you go. Oh by the way when we took the trailer to Wisconsin Dells it Road very smooth. Mr Smith
Quote from: Mr Smith on August 31, 2017, 10:29:05 PM You need the 2 x 4 on the frame. And if you put a jackstand in the wrong place on the torsion tube you can damage the tube and then the suspension would wear out prematurely. Just saying that leaf spring suspension is much easier to work with. The tire that needs to be replace is the only one that gets jacked up not the whole side of the trailer to me that's a little on the sketchy side when trying to change a tire on the side of the road, and you have half the trailer Jack up at one single point that is not very stable.