Author Topic: Battery & Electrical 2018 QS 6.0  (Read 431 times)

Historybuffaz

  • Newbie
  • *
  • Posts: 6
    • View Profile
Battery & Electrical 2018 QS 6.0
« on: September 05, 2022, 02:06:29 PM »
Hello all! I recently purchased a 2018 QS 6.0. The previous owner removed the battery and associated parts to install a bike rack. I canít find anything online about how to reinstall the battery or what the wiring should look like. The only battery related thing I could find is a red wire that leads to a self-resetting breaker and another red wire on the other post. Plus, for some reason they cut the wires for the 4-way plug, but then retired them through a junction box and again after the box.

Iíve attached photos. If you could provide some photos of what it should look like I would greatly appreciate it.

Thanks!

forum image

forum image

forum image


« Last Edit: September 05, 2022, 02:20:38 PM by Historybuffaz »

chappy133

  • Full Member
  • ***
  • Posts: 125
    • View Profile
Re: Battery & Electrical 2018 QS 6.0
« Reply #1 on: September 06, 2022, 04:48:57 PM »
I had a 2011 6.0 years ago.  Under the bench seat should be the electrical cord storage and the 12 VT chargers and inverter. You should be able to rerun or reconnect the 12 VT power cables and crimp on battery connectors. You might need to fabricate or purchase the tray to hold the battery too. Questions on this I would give the folks at etrailer a call and they should be able to assist.
Chuck
2016 16' TBS
2013 F 150
Easton, PA

Historybuffaz

  • Newbie
  • *
  • Posts: 6
    • View Profile
Re: Battery & Electrical 2018 QS 6.0
« Reply #2 on: September 06, 2022, 09:47:30 PM »
Thanks Chuck! Is etrailer the only place to get parts or accessories?

chappy133

  • Full Member
  • ***
  • Posts: 125
    • View Profile
Re: Battery & Electrical 2018 QS 6.0
« Reply #3 on: September 24, 2022, 08:23:09 PM »
Lots of RV vendors but I can only recommend etrailer from personal experience.
Chuck
2016 16' TBS
2013 F 150
Easton, PA