Author Topic: Jeep Camper Legs for my Quicksilver 6.0?  (Read 2460 times)

ALF

  • Newbie
  • *
  • Posts: 5
    • View Profile
Jeep Camper Legs for my Quicksilver 6.0?
« on: January 09, 2017, 04:32:11 PM »
I am very happy with just about every part of my Quicksilver 6.0, except for the bunk support legs. The fittings that hold the legs vertical are bent and no longer hold the legs vertical. The legs themselves are kind of lightweight and hard to adjust, particularly in cold weather. I saw a Jeep Camper, with much beefier independent legs and am wondering if it would be possible to buy them. Does anyone have a source or dealer for those legs?

Thanks!

Al F.
« Last Edit: January 09, 2017, 04:37:57 PM by ALF »

QS61956

  • Newbie
  • *
  • Posts: 28
    • View Profile
Re: Jeep Camper Legs for my Quicksilver 6.0?
« Reply #1 on: January 10, 2017, 07:14:41 AM »
  I use two heavy duty mic stands as a back-up. I cut a board that sits on top and connects them. This works quite well as a supplement, My original bed support is still in factory condition.
« Last Edit: February 12, 2017, 08:38:50 PM by QS61956 »

Dan Miller

  • Administrator
  • Full Member
  • *****
  • Posts: 239
    • View Profile
    • Livin'Lite Recreational Vehicles
Re: Jeep Camper Legs for my Quicksilver 6.0?
« Reply #2 on: January 10, 2017, 08:09:48 AM »
ALF - The support assembly and legs for the Jeep will not work on the QS.  The bunks may look similar but are internally quite different.
The original Bunk Support Assembly for the QS 6.0 may be ordered from any Livinlite dealer and could be shipped directly to you.  The PN for the Assembly is 201761.
djmiller - Elkhart Indiana
www.livinlite.com